VERIS 2 Series 6.5" Full-Range Speaker

The V2-6 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-6 system will produce high-fidelity, broad spectrum sound that belies its modest size. The V2-6 is also an excellent choice for ancillary delay applications. When used to augment a FOH system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even-out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-6 loudspeakers in such a manner, the
system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-6 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device.

Operating Range: 90 Hz to 18 kHz (-10 dB)
Frequency Response: 110 Hz to 16 kHz (±3 dB)
Max Input Ratings: 100W continuous, 250W program, 28.3 volts RMS, 56.6 volts momentary peak
Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free space
Maximum Output: 112 dB SPL / 118 dB SPL (peak)
Nominal Impedance: 8 ohms
Input Connection: NL4-compatible locking connector with terminal strip in parallel
Mounting/Rigging Provisions: 9 x M6 threaded rigging fittings, 4 x M6 threaded fittings for V-HSS and third-party suspension products
Weight: 19.7 lbs (8.9 kg)