Brand:
- JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
- JBL 2414H-C 25 mm (1 in) polymer diaphragm
compression driver improves high frequency
performance as well as system reliability. - The advanced network topology crossover design shapes
frequency response and delivers "coherent summation"
in the crossover region. - <
>High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. - Progressive Transition<
> high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response. - The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard<
> protects the high frequency driver from excess power without interrupting the performance. - Non-resonant, all-steel handles are used.
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
- Dual-angle pole-mount socket allows the speaker to tilt 10<
>for more uniform audience coverage.< >
INV#153759
- 90° x 50° coverage for even and smooth response on and off axis
- Dual-angle pole socket for applications requiring tripod mounting
- Heavy Duty 16 gauge protective screen backed steel grille
- Tough DuraFlex™ enclosure finish
- Utilizes twelve M10 suspension points for safe deployment in light duty installations
- SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance
INV#102217
- 90° x 50° coverage
- Dual-angle pole socket for applications requiring tripod mounting
- Heavy Duty 16 gauge protective screen backed steel grille
- Tough DuraFlex™ enclosure finish
- SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
INV#102218
- Stylish and compact appearance
- Birch plywood enclosure
- Single Ergo-Grip rear pocket handle
- DYNA-TECH™ driver
protection system - Carbon Ring Cone Technology
- Two paralleled NL4-compatible locking connectors internally looped to one 2-terminal barrier strip
INV#103281
- 55° compact vertical floor monitor with Signal Synchronized Transducers™
- 99 dB sensitivity, 132 dB maximum SPL
- DH3 1.25” (32 mm) diaphragm, 1” (25 mm)-exit pure titanium compression driver
- SMX2121 12” (305 mm) LF transducer with fully symmetric drive
- Integrated crossover with steep 24 dB / octave slopes and HF protection
- 90° x 50° coverage pattern
- 500 W continuous, 2000 W peak power handling
INV#191937
- 12" 2-way floor monitor
- 2" titanium HF driver
- Rugged, low-profile design
- Pole socket allows use as a main speaker
- Great for vocals
INV#52384
- Professional 800-Watt Floor Monitor w/12" Woofer
- And 1.75" Titanium Compression Driver
- Professional 800-Watt 2-Way floor monitor (200
INV#155190
- 12" 2-way floor monitor
- 2" titanium HF driver
- Rugged, low-profile design
- Pole socket allows use as a main speaker
- Great for vocals
INV#34970
- 10" floor monitor
- 1" titanium dome compression driver
- Can also be used as a main speaker
- Pole socket allows use as a main speaker
- Great where size is a concern
INV#54210
- Stylish and compact appearance
- Birch plywood enclosure
- Single Ergo-Grip rear pocket handle
- DYNA-TECH™ driver
protection system - Carbon Ring Cone Technology
- Two paralleled NL4-compatible locking connectors internally looped to one 2-terminal barrier strip
INV#103279
- Stylish and compact appearance
- Birch plywood enclosure
- Single Ergo-Grip rear pocket handle
- DYNA-TECH™ driver
protection system - Carbon Ring Cone Technology
- Two paralleled NL4-compatible locking connectors internally looped to one 2-terminal barrier strip
INV#103278
- Lightweight Class D 2-way active stage monitor
- 800 watts of output power
- 10" low frequency driver
- 1" tweeter
INV#180392
- Two-way floor monitor
- 12" Sheffield Pro 1200+ woofer w/ 2.5" voice coil
- 14XT compression driver w/ titanium diaphragm, 1" exit
- 90 x 40 CD horn
- Sound Guard IV tweeter protection
- Carpet covering
- Steel handle
- Heavy duty metal grille
- Die-cast aluminum pole mount
INV#143555
- 15" 2-way floor monitor
- Full frequency response
- Pole socket allows use as a main speaker
- Very high output
INV#50382
- Outstanding audio quality with titanium diaphragm HF drivers
- An ideal match for the EMX series powered mixers and P series power amps
- Design that carries on the simple sophistication of the Concert Club series
- Speaker stand pole sockets on all models
INV#11917
- Lightweight Class D 2-way active stage monitor
- 800 watts of output power
- 12" low frequency driver
- 1" tweeter
INV#180391
- digipack™ Digital Amplifer
- High efficiency BiAmp design
- Coaxial Speaker
- Powerful DSP
- Dual Active Limiter
- Hybrid Enclose Technology
INV#114782
- 55° vertical floor monitor with Signal Synchronized Transducers™
- 100 dB sensitivity, 133 dB maximum SPL
- DH3 1.25” (32 mm) diaphragm, 1” (25 mm)-exit pure titanium compression driver
- SMX2151 15” (381 mm) LF transducer with fully symmetric drive
- Integrated crossover with steep 24 dB / octave slopes and HF protection
- 90° x 50° coverage pattern
- 500 W continuous, 2000 W peak power handling
INV#191935
- 10" floor monitor
- 1" titanium dome compression driver
- Can also be used as a main speaker
- Pole socket allows use as a main speaker
- Great where size is a concern
INV#36359
- Stylish and compact appearance
- Birch plywood enclosure
- Single Ergo-Grip rear pocket handle
- DYNA-TECH™ driver
protection system - Carbon Ring Cone Technology
- Two paralleled NL4-compatible locking connectors internally looped to one 2-terminal barrier strip
INV#103280
- Ultra-compact LF-optimized vented enclosure
- 1-inch HF driver on Constant-directivity horn
- 100° H x 100° V coverage pattern
- Low-profile slanted design
- Versatile 45° aiming angle for under-balcony, on-wall, and stage monitoring applications
- Two 3/8-inch suspension points
INV#34525
- Compact and low-profile for minimal obstruction of audience sightlines
- 50° x 90° nominal coverage
- Bi-amplified or full-range passive operation
- Differential Drive® woofer with neodymium magnet for high power capacity and very light weight
- 4" (voice coil) diameter compression driver with neodymium magnet
INV#48856
- Powerful internal 150W RMS amp can power internal speakers plus up to four PM-100 Personal Stage Monitors using the two External Speaker outputs
- Specially designed dual ferro-fluid 5” drivers offer superior gain and optimum intelligibility at key vocal/instrument frequencies with ultimate feedback rejection
- Maximum 125dB SPL cuts through even the loudest ambient noise clutter
- Balanced ¼” TRS and XLR input jacks (can be used simultaneously if desired)
- Volume control; 3-band EQ controls (High, Mid, Bass); front baffle Power On and Clipping LED indicators
- High-powered Headphone Output and convenient ¼” balanced Line Output for daisy-chaining with other PM-200As, or connecting to mixers and PAs
- Amplifier’s integrated low-noise/distortion Mosfet outputs offer thermal, short circuit, and anti-thump on/off protection
- Externally selectable 115VAC or 230VAC operation
INV#54489
- Specially designed dual ferro-fluid 5” drivers offer 200W peak power handling capacity (100W RMS), superior gain before feedback, and up to 125 dB maximum SPL
- Uniquely tuned response projects audio at the desired frequencies to cut through stage noise while ensuring high feedback immunity
- Volume/Impedance selector and two ¼” In/Out jacks for performer adjustability and easy daisy-chaining with up to 15 other PM-100 monitors
INV#40485
- This arrayable line monitor provides a higher SPL
- From the cabinet before feedback and sharp side
- Attenuation. For the first time, monitor coverage
INV#102597
- This arrayable line monitor provides a higher SPL
- From the cabinet before feedback and sharp side
- Attenuation. For the first time, monitor coverage
INV#102598
- Two-way monitor enclosure
- Peavey Scorpion® Pro 1200+ 12" woofer with 2.5" (64mm) voice coil
- Peavey 14XT™ titanium diaphragm compression driver
- Sound Guard™ IV tweeter protection network
INV#143391
- One Pro Rider® 15 inch woofer with Kevlar® impregnated cone, 4 inch titanium diaphragm compression driver with ferrofluid coupled to a CH®942qt conical horn
- Sound Guard™ 44 high frequency driver protection circuit
- Two full range, 2 bi-amp Neutrik® Speakon® connectors
- Throughput panel on opposite end from input panel has one full-range and one bi-amp Neutrik® Speakon® connector
- SA™-1 black pole-mount stand adapter
- Durable GatorHyde® finish
INV#120536
- One Pro Rider® 15 inch woofer with Kevlar® impregnated cone, 4 inch titanium diaphragm compression driver with ferrofluid coupled to a CH®942qt conical horn
- Sound Guard™ 44 high frequency driver protection circuit
- Two full range, 2 bi-amp Neutrik® Speakon® connectors
- Throughput panel on opposite end from input panel has one full-range and one bi-amp Neutrik® Speakon® connector
- SA™-1 black pole-mount stand adapter
- Durable GatorHyde® finish
INV#120537
- Two-way floor monitor
- 15" Sheffield Pro 1500+ woofer w/ 2.5" voice coil
- 14XT compression driver w/ titanium diaphragm, 1" exit
- 90 x 40 CD horn
- Sound Guard IV tweeter protection
- Carpet covering
- Steel handle
- Heavy duty metal grille
- Die-cast aluminum pole mount
INV#143554
- High efficiency BiAmp design
- Digipro® Class-D power amp technology
- Powerful DSP
- SMPS power supply with power factor correction
- RCF Transducers
- Rotatable high-frequency horn
- Rigging Points
- Low-profile design
INV#123040
- High efficiency BiAmp design
- Digipro® Class-D power amp technology
- Powerful DSP
- SMPS power supply with power factor correction
- RCF Transducers
- Low-profile design
INV#123042
- High efficiency BiAmp design
- Digipro® Class-D power amp technology
- Powerful DSP
- SMPS power supply with power factor correction
- RCF Transducers
- Rotatable high-frequency horn
- Rigging Points
- Low-profile design
INV#123041
- digipack™ Digital Amplifer
- High efficiency BiAmp design
- Coaxial Speaker
- Powerful DSP
- Dual Active Limiter
- Hybrid Enclose Technology
INV#123033