Brand:

- 2 Ch. selectable intercom outlet: Encore channel
- Selectable intercom outlet wall plate. Three-pin
- Male connector and channel select switch on a
INV#42567

- 2 Ch. beltpack adapter: Three-pin to six-pin
- Adapter combines two single-channel three-pin
- Cables into a single two-channel six-pin
INV#60740

- Rack Ears for ED Mixer Amps
- - CH1 - Mic/Line on Phoenix terminal
- - CH2 - Mic on Phoenix terminal - Line on RCA
- - CH3 - Mic on Phoenix terminal - Line on RCA
- - CH3 - 3.5mm Aux on front panel
- Phantom Power support for primary mic
- (1) TELE-PAGING input, and (1) MOH/LINE OUT on 3-prongs Phoenix terminals
- Speaker outputs on 5-prongs Phoenix Terminals
- Power, Signal, -20dB, Clip and Protect Indicators
- Output Current Limiting, Thermal Protection & DC Offset protection
INV#274287

- Provides visual and/or audible indication of a call signal
- Control of both tone volume and light brightness
INV#51685

- 1 pair ear sock covers for 300/400 headsets: Ear
- Sock cover for all CC-300 and CC-400 headsets, 1
- Pair
INV#153252

- 2 Ch. 6-pin intercom outlet: Two-channel six-pin
- Intercom outlet wall plate six-pin male connector
- On a single-gang wall plate for RS-602 (and
INV#49699

- AC40A battery charger: Battery charger, 4-port
- Quick charger w/adapter, 115/230 VAC, power cord
INV#130006

- Rack kit for MA-704 and AX-704: 1RU rack mount
- Kit for MA-704 and AX-704 control panels. Holds
- Up to three IFB control panels.
INV#131010

- CC-110 spare foam ear pad (20 pack):
- CC-110/CC-220 Replacement Part kit
INV#199685

- CC-110 spare foam ear pad single:
- CC-110/CC-220 Replacement Part kit
INV#199676

- CC-110 spare foam mic pop filter:
- CC-110/CC-220 Replacement Part kit
INV#199674

- CC-110 spare Leatherette ear pad single:
- CC-110/CC-220 Replacement Part kit
INV#199677

- Travel case for DX300ES: Travel case for DX300
- Systems. Includes foam inserts, holds MB300 base
- Station, 4 belt packs, with storage for cables
INV#131427

- Headset extension cable: Single 6' headset
- Extension cable for HS15/15D, HS16 headsets
INV#131417

- CAT5 cable: Base station interconnect cable - 7ft
- With RJ45 connectors
INV#131428

- 4ft DX headset cable w/ connector: 48" headset
- Bare leads cable with molded mini-DIN connector
INV#131429

- DX beltpack pouch: Santoprene rubber protective
- Pouch with internal clip for beltpacks
INV#131430

- Battery sled: For WS200 speaker station,
- MB100/MB300ES base stations. Holds 6 AA cells
INV#131431

- 3-way intercom line splitter: Three-way intercom
- Line splitter. One three-pin female and three
- Three-pin male XLR-type connectors.
INV#49153

- Y adapter for IFB systems: Six-pin Y adapter for
- IFB systems. Two six-pin female connectors wired
- To one six-pin male.
INV#131347

- 1 3/8" (3.493 cm)
- 1 3/4" (4.445 cm)
- 1.00 lb (0.45 kgs)
INV#69851

- 117 VAC, @ 60 Hz, 26 Watts
- 3 5/8" (9.2075 cm)
- 6 3/4" (17.145 cm)
- 3.00 lbs (1.36 kgs)
INV#69855

- Two weekly programs
- 14 Chimes
- Six contact outputs
- Automatic daylight/standard time
INV#107886

- Pilot tone detection on 100 V loudspeaker lines
- Voltage free switch 200 V 1 A and LED indications of pilot tone
- Daisy chainable for monitoring multiple zones on a single input contact
- Fits on built in mounts on selected Bosch loudspeakers
INV#160358

- Capacitive touch
- Source selection
- Volume control
- Powered from PLMâ 8M8
INV#160353

- Can be used for all Plena Easyline (PLE) mixer amplifiers
- Remote selection of three music source inputs
- Remote zone selection
- Perfect companion to Bosch volume controls
INV#107877