Brand:

- Stereo Mixer for use with two Microphones and
- Three Stereo Sources, with Ducking and Phantom
- Power, AC only, Half Rack Space, Single and Dual
INV#62007

- Four-Channel Transformer Balanced Microphone
- Mixer with Phantom Power, AC only, Half Rack
- Space, Single and Dual Mount included
INV#62375

- Massive Power supply for high-quality, reliable sound
- All inputs and outputs on removable Euro-block connections for easier installation
- Mic/Line 1 w/ Balanced phoenix input and Manual Mute Trigger
- Line 2 w/ Phoenix&RCA summing connector
- Line 3 w/ Phoenix&RCA summing connector
- Input 1 selectable between Mic/Line input level
- MOH/Zone2 balanced line output assignable via rear-panel dip switches. Selects any or all three input channels-no muting. Can be used for Music on Hold or 2nd Zone
- Mute receive assignable for channels 2&3 on rear-panel dip switches
- Mute can be activated via “VOX” or “Contact In” signal
- Mute Sensitivity and MOH/Zone 2 are both level adjustable
Power outputs available at 4 Ohm, 25V&70V for more system flexibility- Unbalanced Line Output can be used for an extra zone or for recording
- Dedicated Bass&Treble controls (recessed on front panel) allow independent adjustment for main output
- Thermal Overload Protection circuit with rear panel reset breaker
- Input Signal present, Peak&Power On indicators on front panel
- Optional Rack-mount kits for single unit (MB-25B-BK), or dual (MB-25B-J)
- Supplied security caps (YA-920 x 3) for volume knob to prevent unauthorized adjustment
- UL/cUL Listed
- Five Year Warranty
INV#61749

- Eight-Channel Microphone Mixer with EQ per
- Channel, AC only, One Rack Space, Rack Mount Ready
INV#28352

- 70V/25V/4 Ohm/8 Ohm, 120 Watts
- 2U Rack-mountable with optional RK-M3565
- 3 Mic/Line inputs
- - CH1 - Mic on XLR connector
- - CH2 - Mic on Phoenix terminal - Line on RCA
- - CH3 - Mic on Phoenix terminal - Line on RCA
- - CH3 - 3.5mm Aux on front panel
- Phantom Power support for primary mic
- (1) TELE-PAGING input, and (1) MOH/LINE OUT on 3-prongs Phoenix terminals
- Speaker outputs on 5-prongs Phoenix Terminals
- Power, Signal, -20dB, Clip and Protect Indicators
- Output Current Limiting, Thermal Protection & DC Offset protection
INV#274442

- 4 Channel / 4 zone stereo mixer
- 2 Mic/Stereo Line inputs with ducking
- 2 Stereo CD/Line inputs
- On board Speaker and Headphone monitoring
- Euroblock output connectors
- Remote Volume Control
INV#40275

- 70V/25V/4 Ohm/8 Ohm, 65 Watts
- 2U Rack-mountable with optional RK-M3565
- 3 Mic/Line inputs
- - CH1 - Mic/Line on Phoenix terminal
- - CH2 - Mic on Phoenix terminal - Line on RCA
- - CH3 - Mic on Phoenix terminal - Line on RCA
- - CH3 - 3.5mm Aux on front panel
- Phantom Power support for primary mic
- (1) TELE-PAGING input, and (1) MOH/LINE OUT on 3-prongs Phoenix terminals
- Speaker outputs on 5-prongs Phoenix Terminals
- Power, Signal, -20dB, Clip and Protect Indicators
- Output Current Limiting, Thermal Protection & DC Offset protection
INV#274286

- Frequency Response
- 4 Position Phoenix 3.5mm Pitch
- Max. Average Power @ 50Hz-15kHz with .5% THD, 4 400W RMS
- 16.54" (420mm)
- 14.6" (422mm)
INV#169849

- 4 or 8 inputs with 1 or 2 channel outputs
- Fanless, space saving 1U design
- Independent base/treble controls
- Euro block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection
INV#163088

- 4 or 8 inputs with 1 or 2 channel outputs
- Fanless, space saving 1U design
- Configurable output routing (2 channel models only)
- Independent base/treble controls
INV#163089

- 4 inputs with 1 output of 80 or 120 watts of power
- Ideal for commercial and industrial use
- Fanless, space saving 1U design
- Supports 70V and 100V distributed audio systems without the need for a separate transformer
INV#155727

- 2 x 120 watt channels
- 8 input mixer
- Remote volume with optional CS-RV
- Ideal for commercial and industrial use
- Fanless, space-saving 1U design
- Sleek industrial look with illuminated rings, making them easy to see and operate
- Euro-block type mic/line input connectors and output connectors
- Independent Bass and Treble controls for each output channel
- Priority muting
- Configurable output routing
- Utilizes Crown’s DriveCoreTM technology providing excellent audio performance with high efficiency
- Manufactured to lead-free ROHS standards, utilizing recycled metals, and using an energy-saving powder coat process
- Includes rack mounting kit
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
- Energy Star® Certified
INV#155723

- 4 inputs with 1 output of 80 or 120 watts of power
- Ideal for commercial and industrial use
- Fanless, space saving 1U design
- Supports 70V and 100V distributed audio systems without the need for a separate transformer
INV#155726

- One Balanced Line Input
- One Unbalanced, Summing Line Level Input
- Global Power Supply, 100VAC-240VAC ~ 50/60Hz
- Compact 1RU, 1/2 Rack
INV#80325

- 8 inputs with 2 outputs of 40,80, 120 watts of power
- Ideal for commercial and industrial use
- Fanless, space saving 1U design
- Supports 70V and 100V distributed audio systems without the need for a separate transformer
INV#155724

- Specially designed for telephone paging systems
- 3 inputs: 1 TEL, 1 MIC (Lo-Z), 1 AUX (Hi-Z)
- Built-in night ringer
INV#36545

- Compact five channel Mixer-Amplifier for paging, background/foreground music distribution and music/messaging-on-hold
- All inputs/outputs with removable terminal blocks allow quick and easy installation
- Any of five inputs assignable to MOH/ZONE 2 output
- RCA pin jacks for LINES 2 & 3
- Phantom Power (+ 24V DC) incorporated for MIC input
- Module slot accepts optional 900 Series plug-in modules for custom system configurations
- Rear panel-mounted DIP switches allow easy configuring of settings
- Provides auto/manual mute function with adjustable muting sensitivity
- Incorporates Remote volume control connection
- 2-channel broadcast capability together with zone 2 expansion capability in conjunction with BA-200 Series
- Tamper-proof, front-panel bass and treble controls are recessed to protect their settings
- Thermal protection circuitry prevents potential damage from excessive heat build-up
- AC Mains Circuit Breaker
- Supplied accessory security knobs for volume controls prevent unauthorized volume setting changes
- Optional rack-mount kit
- UL/cUL Listed
- Five Year Warranty
INV#80529

- 70V/25V/4 Ohm/8 Ohm, 35 Watts
- 2U Rack-mountable with optional RK-M3565
- 3 Mic/Line inputs
- - CH1 - Mic/Line on Phoenix terminal
- - CH2 - Mic on Phoenix terminal - Line on RCA
- - CH3 - Mic on Phoenix terminal - Line on RCA
- - CH3 - 3.5mm Aux on front panel
- Phantom Power support for primary mic
- (1) TELE-PAGING input, and (1) MOH/LINE OUT on 3-prongs Phoenix terminals
- Speaker outputs on 5-prongs Phoenix Terminals
- Power, Signal, -20dB, Clip and Protect Indicators
- Output Current Limiting, Thermal Protection & DC Offset protection
INV#274283

- 2 Zone Mixer amp w/2 stereo inputs and 6 mic/line
- Inputs. Built-in Output EQ and Crossover
- Compressor Reverb and more. Uses any of the DCP
INV#168651

- One Balanced Mic/Line/Tel Input w/Phantom Power
- 2 Unbalanced, Summing Line Level Inputs
- Variable VOX Mute Sensitivity Control for Input 1
- Contact Closure Mute Terminals
- One Balanced Line Input
- Compact 1RU, 1/2 Rack
- One Unbalanced, Summing Line Level Input
INV#80327

- BGM volume control
- Local BGM connectivity
- Zone Wiring
- Each zone module has three relay driver outputs
INV#40425

- 70V/25V/4 Ohm/8 Ohm, 35 Watts
- Built-in Media Player USB/SD, FM & Bluetooth, with the ability to record to USB or SD
- 3 Mic/Line inputs
- - CH1 - Mic/Line on Phoenix terminal
- - CH2 - Mic on Phoenix terminal - Line on RCA
- - CH3 - Mic on Phoenix terminal - Line on RCA
- - CH3 - 3.5mm Aux on front panel
- Phantom Power support for primary mic
- (1) TELE-PAGING input, and (1) MOH/LINE OUT on 3-prongs Phoenix terminals
- Speaker outputs on 5-prongs Phoenix Terminals
- Power, Signal, -20dB, Clip and Protect Indicators
- Output Current Limiting, Thermal Protection & DC Offset protection
INV#274285

- Modular Eight Channel Mixer/Amplifiers for paging, background/foreground music distribution and music/messaging-on-hold
- Proven TOA Quality and Reliability
- Engineered for High Performance with wide frequency response, very low noise and distortion, and excellent output regulation
- Eight Module Slots accept any combination of TOA plug-in modules for custom system configurations
- 25 V, 70 V and 8 Ohm Transformer-Isolated Speaker Outputs with screw terminal connector and protective cover plate (A-903MK2: 4 ohm)
- Direct Low-Impedance Output Mode bypasses output transformer
- Dual Mute Bus permits multiple levels of paging priority using optional mute-type modules
- External Mute Terminals for activating mute function with external switch closure
- Remote Master Volume Terminals for control with an external 10k ohm linear-taper potentiometer
- Individual Channel and Master Volume Controls
- Bass/Treble Tone Controls with tone defeat switch
- Low Cut Switch to limit low frequency response
- Auxiliary Output for connecting an external mixer or recording device
- Insert Jacks for connecting external signal processing
- Bridging Input/Output for input expansion or recording device
- Normal, Clip, Power, Protect, and Signal Indicators provide unit status
- Rear Panel AC Convenience Outlet for powering external equipment
- Turn-On Delay disconnects output during power-up
- Over-current and Thermal Protection Circuitry prevents potential damage from overload, short-circuit and overheating
- Volume Control Security Knobs Included (4)
- Optional Rack-Mount Kit, MB-25B
- UL / cUL Listed
- Five Year Warranty
INV#13828

- Specially designed for telephone paging systems
- 3 inputs: 1 TEL, 1 MIC (Lo-Z), 1 AUX (Hi-Z)
- Built-in night ringer
INV#36365

- 6 microphone/line inputs plus 3 music source inputs
- 70 V, telephone and a call station input with priority & VOX
- 2 zones and announcement only output
- Voiceâ activated emergency override
INV#107879

- 4 microphone/line inputs, plus 3 music source inputs
- 70 V and telephone input with priority & VOX
- Announcement only output, 3 wire volume override
- Voice activated emergency override
INV#107881

- Specially designed for telephone paging systems
- 3 inputs: 1 TEL, 1 MIC (Lo-Z), 1 AUX (Hi-Z)
- Built-in night ringer
INV#28858

- Converge SR 1212 8-microphone channel digital
- Matrix mixer
INV#140224

- 70V/25V/4 Ohm/8 Ohm, 65 Watts
- Built-in Media Player USB/SD, FM & Bluetooth, with the ability to record to USB or SD
- 3 Mic/Line inputs
- - CH1 - Mic/Line on Phoenix terminal
- - CH2 - Mic on Phoenix terminal - Line on RCA
- - CH3 - Mic on Phoenix terminal - Line on RCA
- - CH3 - 3.5mm Aux on front panel
- Phantom Power support for primary mic
- (1) TELE-PAGING input, and (1) MOH/LINE OUT on 3-prongs Phoenix terminals
- Speaker outputs on 5-prongs Phoenix Terminals
- Power, Signal, -20dB, Clip and Protect Indicators
- Output Current Limiting, Thermal Protection & DC Offset protection
INV#274288

- DIP switches to set the system ID
- Program/Run switch that allows system programming
- Power jack for 12V DC power
- Audio connections for central amplifier, low-power BGM, high-power BGM, emergency/shift change trigger, and auxiliary trigger
INV#40423

- Frequency Response
- 4 Position Phoenix 3.5mm Pitch
- Max. Average Power @ 50Hz-15kHz with .5% THD, 4 200W RMS
- 16.54" (420mm)
- 14.6" (422mm)
INV#169852

- 4 microphone / line inputs, plus music source input
- Announcement only output, 3â wire volume override
- Wide range of output power (120 Watts)
- 2â tone chime
INV#107884