Brand:
- 12” woofer for low-end punch in a compact enclosure and 1.5” high-frequency titanium compression driver
- 55 Hz – 20 kHz frequency range
- 250 W continuous and 1000 W peak power handling
- 95 dB SPL sensitivity; 125 dB max SPL
- 32.8 lbs (14.9 kg)
INV#148743
- Components: 8 inch woofer with woven fiberglass cone, 1 inch PEI diaphragm tweeter with fluid cooling
- Contemporary, high design appearance
- Built in InvisiBall® mounting hardware*, plus available U bracket
- Wide 100 degree x 100 degree coverage
INV#190317
- Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback sound levels more consistent
- Components: Sixteen 25 mm (1 in) soft dome tweeters and four 125 mm (5 in) high-power LF drivers, arranged coaxially
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection of HF devices
- Swivel (pan) / tilt wall bracket included
INV#99778
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection
- Built-in 70V/100V transformer, plus 8 ohm direct capability
- Swivel (pan) / tilt wall bracket included
INV#99776
- Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback sound levels more consistent
- Components: Sixteen 25 mm (1 in) soft dome tweeters and four 125 mm (5 in) high-power LF drivers, arranged coaxially
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection of HF devices
- Swivel (pan) / tilt wall bracket included
INV#99777
- 15” woofer for extended low-frequency response and 1.5” high-frequency titanium compression driver
- 44 Hz – 20 kHz frequency range
- 250 W continuous and 1000 W peak power handling
- 96 dB SPL sensitivity; 126 dB max SPL
- 36.5 lbs (16.6 kg)
INV#148742
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection
- Swivel (pan)/tilt wall bracket included
- Built-in 70V/100V transformer, plus 8 ohm direct capability
INV#99773
- JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
- JBL 2414H-C 25 mm (1 in) polymer diaphragm
compression driver improves high frequency
performance as well as system reliability. - The advanced network topology crossover design shapes
frequency response and delivers "coherent summation"
in the crossover region. - <
>High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. - Progressive Transition<
> high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response. - The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard<
> protects the high frequency driver from excess power without interrupting the performance. - Non-resonant, all-steel handles are used.
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
- Dual-angle pole-mount socket allows the speaker to tilt 10<
>for more uniform audience coverage.< >
INV#153759
- 15mm Plywood Enclosure, Internally Braced, with Textured Paint
- EVS-12S 305mm (12”) Woofer for Powerful, Engaging Bass Response
- Class D Lightweight Amplifier
- Pole Mount for Full-Range Systems
- Dual XLR Inputs and Outputs
- Switchable EQ Modes for Different Applications
- LED indicators for Power On and Limit
INV#102959
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection
- Swivel (pan)/tilt wall bracket included
- Built-in 70V/100V transformer, plus 8 ohm direct capability
INV#99774
- 1” Exit Compression Driver with 90° x 50° Coverage PT™ Waveguide
- 205 mm (8 in) LF transducer
- Compact enclosure
- 750W Program
- Dual Neutrik NL4 connectors plus screw terminal
- Attachment points for optional U-bracket, third part OmniMount® type bracket and stand mount accessory
INV#52526
- Compact power for sound reinforcement and stage monitoring
- 90° x 50° coverage-pattern waveguide
- 60° Monitor Angle
- 94 dB SPL sensitivity; 132 dB max SPL
- Braced 15mm plywood enclosure
- Pole mount or stack with Live X Subwoofers
- Black textured finish
INV#81698
- 90° x 50° coverage
- Dual-angle pole socket for applications requiring tripod mounting
- Heavy Duty 16 gauge protective screen backed steel grille
- Tough DuraFlex™ enclosure finish
- SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
INV#102218
- Four 125 mm (5 in) high-power LF drivers
- 500 Watt power handling
- Built-in purpose-designed crossover network, for combining with CBT 70J-1
- Coupler plate included
- Extended pattern control (to 400 Hz for ± 20° control, to 200 Hz for substantial off-axis cancellation)
- Extended bass response to 45 Hz
INV#99779
- The new design of the HS7 includes the convenient mic stand insert on the bottom of the unit. This
allows a quick setup on top of a mic stand, with the HS7 angled upward for accurate vocal monitoring. - The included mic stand adaptor insures a more stable and secure placement on any mic stand.
- Molded-in yoke bracket points. With the optional yoke bracket assembly the HS7 can be mounted to
a wall or ceiling, or attached to a mic stand. - Microphone boom attachment on top of the HS7 eliminates the need for a second mic stand for your
microphone. (Requires optional hardware). - Integrated handle into the top of the enclosure.
- Each Hot Spot 7 comes equipped with two Twist-lock 1/4" Combo speaker jacks, all of which are wired in parallel to allow easy "daisy chaining'
of multiple Hot Spots. - Mounts to the top of the PA6S, PA6SR, OR HS7
- Allows mic boom to be mounted on top of the unit.
- Works With 3/8" & 1/2" mic booms
- The new design of the HS7 includes the convenient mic stand insert on the bottom of the unit. This
allows a quick setup on top of a mic stand, with the HS7 angled upward for accurate vocal monitoring. - The included mic stand adaptor insures a more stable and secure placement on any mic stand.
- Molded-in yoke bracket points. With the optional yoke bracket assembly the HS7 can be mounted to
a wall or ceiling, or attached to a mic stand. - Microphone boom attachment on top of the HS7 eliminates the need for a second mic stand for your
microphone. (Requires optional hardware). - Integrated handle into the top of the enclosure.
- Each Hot Spot 7 comes equipped with two Twist-lock 1/4" Combo speaker jacks, all of which are wired in parallel to allow easy "daisy chaining'
of multiple Hot Spots. - Mounts to the top of the PA6S, PA6SR, OR HS7
- Allows mic boom to be mounted on top of the unit.
- Works With 3/8" & 1/2" mic booms
INV#66896
- 2-Way Full-range
- Vented LF enclosure
- 1.25” voice coil (titanium diaphragm)
- PRO™ Driver protection circuit
- HF-horn features Varipath™
- Trapezoidal (25° per side)
- 4 x M8x1.25 attachment inserts
INV#29642
- More power, fuller sound for larger rooms
- 90° x 50° coverage-pattern waveguide
- 60° Monitor Angle
- 134 dB max SPL
- Braced 15mm plywood enclosure
- Pole mount or stack with Live X Subwoofers
- Black textured finish
INV#81699
- Integrated 800 watt power amplifier
- Biamplified design with transducer protection
- EV8L 8” high-output LF transducer
- DH2005 1” exit true compression driver
- 90° x 50° coverage pattern
- Rotatable horn design
- 123 dB maximum SPL
- Selectable high-pass filter for use with subwoofers
- Line and microphone inputs
- Integral monitor angle on enclosure
- Built-in pole mount
- Lightweight (< 20 lbs) with integral handle for easy carrying
INV#59567
- 1200 W (peak), 128 dB peak SPL system that is reliability verified with over 500 hours of abuse testing and endurance testing to 4x typical industry practices.
- 1.4 inch DH-1C (1 inch exit) titanium compression driver for extended transparent high-frequency response.
- High-output EVS-12M woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
INV#245812
- Discreet and aesthetic trapezoidal enclosure
- Optimized voicing for full-range reproduction
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability in LF driver
- Terminal strip and NL4-compatible connectors
- Multiple bracket options offer affordable arraying solutions
- Included in Community’s Forecaster HD ceiling distributed
system software
INV#127323
- EV8L weatherized woofer
- DH2005 true compression driver
- Weatherized for indoor and outdoor use
- “Clickn’ Mount” Quick SAM mounting system for wide range of motion included
- 4-pin detachable Phoenix-style connector
INV#37744
- K Series performance in a lightweight, birch design
- 1000 watt Class D power modules in all models (2 x 500 W continuous)
- Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
- DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
- Rugged, texture-painted birch enclosures
- Four-position Mic/Line gain
- Tour-grade 16 gauge steel grilles
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points for suspended installation (full-range models)
- Functions as stage monitor
INV#60743
- EKX 15: 1600 W (peak), 132 dB peak SPL utilizing high sensitivity transducers designed and engineered by EV.
- EV patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage.
- Lightweight, compact 15 mm wood enclosure with internal bracing, and durable EVCoat finish.
- Eight M10 threaded mounting points, aluminum pole mounts, and all metal handles.
INV#177820
- EKX 12: 1400 W (peak), 131 dB peak SPL utilizing high sensitivity transducers designed and engineered by EV.
- EV patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage.
- Lightweight, compact 15 mm wood enclosure with internal bracing, and durable EVCoat finish.
- Eight M10 threaded mounting points, aluminum pole mounts, and all metal handles.
INV#177821
- 90° x 50° coverage for even and smooth response on and off axis
- Dual-angle pole socket for applications requiring tripod mounting
- Heavy Duty 16 gauge protective screen backed steel grille
- Tough DuraFlex™ enclosure finish
- Utilizes twelve M10 suspension points for safe deployment in light duty installations
- SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance
INV#102217
