Brand:
- Low profile for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
INV#5776
- Supercardioid polar pattern rejects the pit orchestra and offers an impressive gain before feedback
- hase coherent cardioid®design prevents coloration from surface sound reflections
- Finely crafted, rugged housing withstands the rigors of the stage
- Low profile to be inconspicuously placed on the stage-floor
- Industry standard stage-floor microphone
INV#11820
- Flat frequency response across the vocal range for uncolored sound
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Balanced, transformerless output for increased immunity to noise over long cable runs
INV#9355
- Surface mount Omni-directional boundary microphone
- Condenser element
- Half Omni Pickup Pattern
- Internal Hi-pass filter
- Mini XLR connector
- Includes 30-foot cable with mini to standard XLR connectors
- 9-52 Volt Phantom Power Operation
INV#53310
- Very low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Uniform polar pattern for maximum rejection of unwanted sounds
- Rugged design and construction
- 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
INV#5775
- Table stand (XLR-3) with configurable switch (On,
- On/Off, PTT, PTM) and TTL Logic
INV#163540
- Center of table (360°) or cross table (bidirectional) coverage patterns
- Individual audio output for each element
- Programmable mute switch
- Bi-color status indicator
- Logic input/output for remote LED and mute control
- CommShield® Technology
INV#50981
- Programmable membrane on/off switch plus LED on/off indicator
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Flat frequency response across the vocal range for uncolored sound
INV#9188
- Programmable membrane on/off switch plus LED on/off indicator
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Flat frequency response across the vocal range for uncolored sound
INV#9153
- Inline logic box with (2) XLR-3 for audio and (1)
- XLR-5 for control (via MAS 1)
INV#163546
- CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and high resistance to intense nearby radio signals
- Attached 12’ XLR cable
- Frequency response ideal for capturing fast transients in a wide variety of locations, including podiums and desktops
- Superior Shure design and rugged, dependable construction
INV#142263
- Install boundary mic - Omni - with bi-color LED
- (XLR-5)
INV#163555
- Flat frequency response across the vocal range for uncolored sound
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Balanced, transformerless output for increased immunity to noise over long cable runs
INV#62010
- Only 1.25 inch (3.8 cm) in diameter
- Logic input for remote LED control
- Bi-color status indicator
INV#51034
- Plug-and-play operation on Mac OS and Windows
- 16-Bit, 44.1- 48kHz sample rates
- Miniature, low-profile design
- Omni-directional pickup pattern
- 10-foot USB cable included
- Ideal for recording meetings, conferences or creating podcasts
- Sleek black finish
- Includes Cakewalk® Sonar LE™
INV#52713
- RF resistant design
- Low profile mounting in panels, table tops, walls or ceilings
- Hemi cardioid directional pick-up pattern
- Dual surface and bottom shock isolation bushings
- Low noise transformerless electronic design
- 13/16" (20mm) threaded diameter with mounting hardware
- Conforms to RoHS
INV#48136
- Hemispherical polar pattern
- Pressure Zone Microphone®design prevents coloration from surface sound reflections
- Switchable dual-frequency response offers a choice of flat response or rising high-frequency response
- Rugged detachable cable
INV#11833
- Only 1.25 inch (3.8 cm) in diameter
- Wide dynamic range and smooth frequency response
- CommShield® Technology
INV#51036
- Live sound, recording
- Live sound, recording
- Live sound, recording
- Ceremonies, weddings
- Ceremonies, weddings
- Piano
- Room ambience
INV#14557
- Programmable membrane on/off switch plus LED on/off indicator
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Flat frequency response across the vocal range for uncolored sound
INV#9311
- Podium microphone
- Ultra thin dual section gooseneck is strutted, yet flexible
- Uniform frequency response and polar pattern
INV#104145
- Easy switching between omni, cardioid, supercardioid, or figure 8 polar patterns
- Versatility for different acoustic environments
- Consistent microphone voicing across all four patterns
- Easy to use mute switch, programmable for either latching on/off or momentary operation
INV#69097
- CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and high resistance to intense nearby radio signals
- Attached 12’ XLR cable
- Frequency response ideal for capturing fast transients in a wide variety of locations, including podiums and desktops
- Superior Shure design and rugged, dependable construction
INV#142264
- Engineered in high quality Brass
- Wide smooth response
- Balanced output
- Simple through-desk shock mounting
- Low profile at surface level
- 'RF Friendly' technology offering immunity from GSM radio frequency interference
INV#49307
- Only 1.25 inch (3.8 cm) in diameter
- Wide dynamic range and smooth frequency response
- CommShield® Technology
INV#51033
- Only 1.25 inch (3.8 cm) in diameter
- Logic input for remote LED control
- Bi-color status indicator
INV#50999
- Only 1.25 inch (3.8 cm) in diameter
- Wide dynamic range and smooth frequency response
- CommShield® Technology
INV#50997
- Only 1.25 inch (3.8 cm) in diameter
- Logic input for remote LED control
- Bi-color status indicator
INV#51039
- Only 1.25 inch (3.8 cm) in diameter
- Wide dynamic range and smooth frequency response
- CommShield® Technology
INV#51037
- Only 1.25 inch (3.8 cm) in diameter
- Wide dynamic range and smooth frequency response
- CommShield® Technology
INV#51035
- Only 1.25 inch (3.8 cm) in diameter
- Wide dynamic range and smooth frequency response
- CommShield® Technology
INV#50998
- Only 1.25 inch (3.8 cm) in diameter
- Wide dynamic range and smooth frequency response
- CommShield® Technology
INV#51038
- Omnidirectional - Condenser Boundary Microphone,
- Built-in Preamp, Attached 12' Unterminated
- Bottom-exit Cable, Logic Functions, Programmable
INV#110724
- Programmable membrane on/off switch plus LED on/off indicator
- LED logic input and switch logic output terminals for remote control or use with automatic mixers
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Flat frequency response across the vocal range for uncolored sound
- Balanced, transformerless output for increased immunity to noise over long cable runs
INV#9317
- Programmable membrane on/off switch plus LED on/off indicator
- LED logic input and switch logic output terminals for remote control or use with automatic mixers
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Flat frequency response across the vocal range for uncolored sound
- Balanced, transformerless output for increased immunity to noise over long cable runs
INV#9353
- Programmable membrane on/off switch plus LED on/off indicator
- LED logic input and switch logic output terminals for remote control or use with automatic mixers
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Flat frequency response across the vocal range for uncolored sound
- Balanced, transformerless output for increased immunity to noise over long cable runs
INV#91501
- Flat frequency response across the vocal range for uncolored sound
- Sleek, low-profile design for unobtrusive appearance
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Balanced, transformerless output for increased immunity to noise over long cable runs
INV#9382
- Available in Black and White
- Back-electret half-cardioid condenser microphone
- 9-52 volt phantom power
- Includes windscreen and mounting bracket
- 10 ft. Cable
- Weight Unpacked: 0.93 lb(0.42 kg)
- Weight Packed: 1.25 lb(0.567 kg)
- Width Packed: 4.5"(11.43 cm)
- Height Packed: 9.5"(24.13 cm)
- Depth Packed: 3"(7.62 cm)
INV#120522
- Available in Black and White
- Back-electret half-cardioid condenser microphone
- 9-52 volt phantom power
- Includes windscreen and mounting bracket
- 10 ft. Cable
- Weight Unpacked: 0.93 lb(0.42 kg)
- Weight Packed: 1.16 lb(0.526 kg)
- Width Packed: 4.5"(11.43 cm)
- Height Packed: 9.5"(24.13 cm)
- Depth Packed: 3"(7.62 cm)
INV#48372
- LumiComm Touch Ring Omni Boundary Layer
- Installation Microphone, White - 200Hz-30kHz
INV#177234
