Brand:

- Polar Pattern : omni-directional
- Element : back electret-Condenser
- Frequency Response : 20 Hz - 20 kHz
- Impedance : 250 30% (at 1,000Hz)
- Sensitivity : -63 dB +-3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
- Operating Voltage : phantom power 9V-52VDC
INV#29582

- Cost effective measurement microphone
- Improved version of the SMAARTMIC™ previously offered by EAW
- Ideally suited for acoustical measurements sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
INV#50295

- Includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter
- 6mm pre-polarized condenser capsule
- Hi SPL response
- Precision machined brass housings
- Low noise electronics
- Replaceable electronics and capsule 3 year warranty
INV#102983

- 6mm pre-polarized condenser capsule
- Hi SPL response
- Precision machined brass housings
- Low noise electronics
- Replaceable electronics and capsule 3 year warranty
INV#60760

- Cost effective measurement microphone
- Ideally suited for acoustical measurements sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
INV#66995

- Discreet, flush-mounted design blends seamlessly into common ceiling surfaces
- Omnidirectional condenser microphone capsule operates on phantom power and can be located up to 610 meters (2,000 feet) away from the sound processor
- Spring clips help make installation easy while keeping the microphone firmly in place
- Condensation cover protects wire terminals from moisture collection and ensures sustained operation in above-ceiling mounting locations
- Bose Part # 808932-0210
INV#240257

- ¼-inch, pre-polarized electret-condenser capsule
- Linear frequency response between 20 Hz and 20 kHz
- Omnidirectional polar pattern
- Low noise, low distortion
- All-metal chassis
- Comes with a clip, foam windscreen, and hard case
- High-quality components and rugged construction
- Suitable for system analysis and measurement
- Especially recommended for use with PreSonus StudioLive mixers and VSL with Smaart® Measurement Technology
INV#148753

- Cost effective measurement microphone
- Improved version of the SMAARTMIC™ previously offered by EAW
- Ideally suited for acoustical measurements sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
INV#80430

- Top of the line measurement microphone with extraordinary impulse response for those who have stringent requirements and demand the very best
- Ideally suited for acoustical measurements that require extended frequency response, including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely accurate free-field measurement microphone is required
- Provides laboratory grade accuracy
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
INV#80432

- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- Mini Size
- Low Cost High Performance
- MAX Function
- Level Range Display
- Resolution 0.5 dB
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
- Mini Size
- Low Cost High Performance
- MAX Function
- Level Range Display
- Resolution 0.5 dB
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
- Mini Size
- Low Cost High Performance
- MAX/MIN Function
- Level Range Display
- AC Signal Output
- Resolution 0.1 dB
- IEC 651 Type II, ANSI S1.4 Type II
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
- Mini Size
- Low Cost High Performance
- MAX/MIN Function
- Level Range Display
- AC Signal Output
- Resolution 0.1 dB
- IEC 651 Type II, ANSI S1.4 Type II
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
INV#112856

- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Low Cost High Performance
- MAX Function
- Level Range Display
- Resolution 0.5 dB
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
INV#39349

- Flat response, excellent electro-acoustical characteristics
- Ideal for room analysis systems, measurement, testing and recording
- Standard 1/2" measurement diameter
- Type: Back-electret condenser mic
- Pickup Pattern: Omni-directional
- Frequency Response: 20~ 20000Hz
- Sensitivity: -37dBV/Pa (14mV/Pa)
- Rated Impedance: 200 ohm
- Max. SPL: 132dB
- Signal-to-noise Ratio: >70 dB
- Power Supply: 9~52V Phantom power
- Current Consumption: 2mA
- Connector: 3-pin XLR gold-plated
- Weight: 150g (5.3 oz)
- Weight Unpacked: 1.17 lb(0.53 kg)
- Weight Packed: 1.17 lb(0.53 kg)
- Width Packed: 4.75"(12.065 cm)
- Height Packed: 12"(30.48 cm)
- Depth Packed: 3"(7.62 cm)
INV#120518