Brand:
- Four receivers in a rugged 1RU metal chassis with internal power supply
- Individual gain controls, LED meters, and XLR outputs for each channel
- Up to 64 MHz tuning range (region dependent)
- Digital predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- RF cascade ports allow distribution of RF signal to another unit
- Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
- Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications
- AES 256-bit encryption-enabled for secure transmission
- Audio summing routes two or more audio channels to combinations of receiver outputs. Use each channel’s gain adjustment to reach the desired mix.
- Dante™ digital networked audio over Ethernet
- Ethernet networking for streamlined frequency coordination and deployment across multiple receivers
- Interference detection and alerts provided on both the receiver and WWB6
- Up to 60 dB independently adjustable gain for each channel
- Wireless Workbench® 6 (WWB6) software integration for advanced coordination, monitoring, and control
- AMX/Crestron® control
- Compatible with the AXT600 Axient® Spectrum Manager
- Intuitive front panel LCD menu and controls with lockout feature
- Upgraded LCD with adjustable contrast and brightness
- Audio and RF LED meters with peak indicator
- Switchable mic/line output level
- Remoteable ½ wave antennas
INV#149721
- Predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
- Interference detection and alerts provided on both the receiver and Wireless Workbench® 6
- Front panel gain adjustment buttons provide up to 60 dB additional gain
- AES 256-bit encryption-enabled for applications where secure transmission is needed
- Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench® 6 integration, and AMX/Crestron control
- Support for frequency coordination with the Axient® Spectrum Manager
- Rugged metal chassis
- Intuitive front panel LCD menu and controls with lockout feature
- Upgraded LCD with adjustable contrast and brightness
- Audio and RF LED meters with peak indicator
- Remoteable ½ wave antennas
- Furnished rack hardware
INV#102821
- Rack Hardware for Dual ULX Receivers, P2T, P4T,
- DFR11EQ5, DP11EQ, SCM262 or SCM268 (one kit
- Required per two receivers)
INV#29675
- Wireless Receiver
- Rack mountable receiver with removable antennas for exceptional audio and rock-solid performance in multi-system installations for house of worship, education and live music applications.
INV#217881
- Rack tray for use with BLX4, BLX88, GLXD4, PG4,
- PG88, PGX4, PGXD4
INV#161591
- Two receivers in a rugged 1RU metal chassis with internal power supply
- Individual gain controls, LED meters, and XLR outputs for each channel
- Up to 64 MHz tuning range (region dependent)
- Digital predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- RF cascade ports allow distribution of RF signal to another unit
- Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
- Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications
- AES 256-bit encryption-enabled for secure transmission
- Audio summing routes both audio channels to each XLR receiver output
- Dante™ digital networked audio over Ethernet
- Up to 60 dB independently adjustable gain for each channel
- Ethernet networking for streamlined frequency coordination and deployment across multiple receivers
- Wireless Workbench® 6 (WWB6) software integration for advanced coordination, monitoring, and control
- Interference detection and alerts provided on both the receiver and WWB6
- AMX/Crestron® control
- AXT600 Axient® Spectrum Manager compatible
- Intuitive front panel LCD menu and controls with lockout feature
- Audio and RF LED meters with peak indicator
- XLR connectors with switchable mic/line output level
- Remoteable ½ wave antennas
INV#104479
- Rack Hardware for Single ULX Receiver, P2T, P4T,
- DFR11EQ5, DP11EQ, SCM262 or SCM268
INV#29948
- Automatic Frequency Selection with group scan function
- Up to 1440 selectable frequencies
- 5-segment transmitted audio signal strength meter
- RF indicator
- 3-segment transmitter battery fuel gauge
- Advanced multi-function LCD displays group and channel
- Mic/Line switch
- Detachable 1/4-wave antenna
- XLR and 1/4-inch output
- Rugged plastic chassis
- 1/2 rack design
INV#99261
- ATW-RC13 Rack-mount receiver chassis, ATW-RU13 x2
- Receiver unit and ATW-T1001 UniPak transmitter
- X2. Select a Wireless Essentials microphone or
INV#177759
- Automatic Frequency Selection
- Automatic Transmitter Setup
- 960 Selectable frequencies across 24 MHz bandwidth
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversity
- RF presence LED
- 5-segment audio meter
- Multi-function, backlit LCD
- Low battery indicator
- Frequency and power lockout
- Rugged metal chassis
- Volume control on rear of unit
- 1/2 rack design
- Furnished rack hardware
- Non-slip bumpers for use out of rack
- XLR and 1/4" outputs
INV#99065
- 2.4GHz digital wireless system
- Dual-channel receiver mounts directly to smartphones, tablets, digital cameras and tripods via included bracket arms, hook-and-loop fasteners, 1/4"–20 adapter, shoe mount adapter
- Plugs directly into iPhone and other iOS devices via included Lightning cable
- Plugs directly into Android devices via USB Micro B or USB-C cables (both included)
INV#210405
- ATW-RC13 Rack-mount receiver chassis, ATW-RU13
- Receiver unit and ATW-T1001 UniPak trans-mitter.
- Select a Wireless Essentials microphone or cable
INV#177762
- XLR unbalanced line output cable for EK100G3 with
- 1/8" to male XLR connectors
INV#35012
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction
INV#248148
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction
INV#248146
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
INV#112641
- Portable ENG set with (1) ME2-
INV#237998
- Transparent 24-bit digital audio
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction
INV#248151
- Dual Wireless Vocal System wit
INV#248152
- High-resolution LCD screen status display
- Real-time transmitter battery status displayed in hours and minutes (accurate within + / - 15 minutes)
- Remote adjustable transmitter gain control
- Two-color charge indicator LED
- XLR and ¼" output connectors
- Lightweight, durable construction
INV#149527
