Brand:
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- High fidelity, all horn loaded
- High efficiency
- Integral mounting points
- High power passive crossover
- Five-year product warranty / Fifteen-year enclosure warranty
INV#50293
Call
- Paging Horn Speakers for voice paging and tone signaling distribution
- Weather-Resistant to withstand demanding environmental conditions
- Double Re-Entrant Horn with Compression Driver
- Controlled Dispersion
- High Sensitivity
- Usable as a Microphone for intercom talk-back applications
- Built-In 25 V / 70.7 V Transformer ("T" Models) with screwdriver-adjustable power taps (8 and 16 ohm models also available)
- Lightweight, Sealed, Aluminum Enclosure prevents moisture damage
- Cable Strain-Relief
- IEC IP-65 Standards Compliant for dust and moisture-resistance
- Wide Temperature Range: -4°F to 131°F
- Phenolic Loudspeaker Diaphragm prevents deformation from heat and moisture
- Stainless-Steel Mounting Bracket for easy installation and aiming in wall, pole or ceiling-mount applications
- Five Year Warranty
INV#51150
- 110 W transformer for 70 V or 100 V lines, with 8 Ohm thru
- Extended bandwidth, extremely smooth frequency response
- 110° x 85° HF coverage, rotatable horn
- SonicGuard™ overload protection
- 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver
- Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket
- Sealed input panel cover and screwdown input terminals
INV#9926
- Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback sound levels more consistent
- Components: Sixteen 25 mm (1 in) soft dome tweeters and four 125 mm (5 in) high-power LF drivers, arranged coaxially
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection of HF devices
- Swivel (pan) / tilt wall bracket included
INV#99778
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
- Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options
- Euroblock connectors allows pre-wiring of the system
- Low saturation 70/100V transformer with 8 ohm bypass
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Complete EASE, CAD & BIM information available online
- Can also be used as a Cinema surround loudspeake
INV#153778
- 150 Watts Continuous Power Handling
- Professional Drivers and Crossover Network
- Included Mounting Bracket
- Transparent and Faithful Sonic Performance
- Magnetically Shielded Transducers
- SonicGuard™ Overload Protection
INV#261129
- Highly weather-resistant IP56 rating
- Consistent 120° x 120° broadband pattern control
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection
- 80 Hz – 20 kHz frequency response.
- 200 Watt 70V/100V multi-tap (built-in transformer) direct 8 low-impedance.
INV#114810
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#53163
Call
- 6” weather treated woofer; 1” silk dome tweeter
- 105° Axisymmetric (conical) coverage
- 80 watt low-saturation and low-loss 70/100V transformer with 8Ω bypass
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
Complete EASE, CF2, CAD, and BIM information available online
INV#165318
- Choose from matching grilles, enclosures and mounting. Rings (order separately)
- Double re-entrant design provides superior audibility of voice and tone signaling
- High-efficiency, 15 watt compression driver with proven record of outstanding service reliability
- May be flange or recess mounted
- Transformer(T) equipped version for 25, 70.7, or 100V line
- Vandal and environment-resistant metal construction for outdoor or indoor use
INV#39050
- Highly weather-resistant IP56 rating
- Consistent 90° x 90° broadband pattern control
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection
- 55 Hz – 20 kHz frequency response.
- 200 Watt 70V/100V multi-tap (built-in transformer) direct 8 low-impedance.
INV#114817
- 110 W transformer for 70 V or 100 V lines, with 8 Ohm thru
- Extended bandwidth, extremely smooth frequency response
- 110° x 85° HF coverage, rotatable horn
- SonicGuard™ overload protection
- 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver
- Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket
- Sealed input panel cover and screwdown input terminals
INV#29718
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#42035
Call
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
- Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options
- Euroblock connectors allows pre-wiring of the system
- Low saturation 70/100V transformer with 8 ohm bypass
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Complete EASE, CAD & BIM information available online
- Can also be used as a Cinema surround loudspeake
INV#153777
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection
- Built-in 70V/100V transformer, plus 8 ohm direct capability
- Swivel (pan) / tilt wall bracket included
INV#99776
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- High fidelity, all horn loaded
- High efficiency
- Integral mounting points
- High power passive crossover
- 200W, 70V autoformer
- Five-year product warranty / Fifteen-year enclosure warranty
INV#48392
Call
- Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback sound levels more consistent
- Components: Sixteen 25 mm (1 in) soft dome tweeters and four 125 mm (5 in) high-power LF drivers, arranged coaxially
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection of HF devices
- Swivel (pan) / tilt wall bracket included
INV#99777
- Highly weather-resistant IP56 rating
- Consistent 120° x 120° broadband pattern control
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection
- 80 Hz – 20 kHz frequency response.
- 200 Watt 70V/100V multi-tap (built-in transformer) direct 8 low-impedance.
INV#114816
- Transducers: LF 1 x 10” carbon ring cone; coaxial HF - 1 x 1.25” exit compression driver
- Operating Range: 70 Hz – 16 kHz
- Sensitivity (1W/1m): 97 dB
- Power Handling: 200W continuous @ 8 ohms
- Continuous Max Output: 122 dB (128 dB Peak)
- 70V/100V Autoformer: 200W, 100W, 50W, 25W (@70V only)
- Nominal Beamwidth (H x V): 90° x 90° (conical)
- Finish: Light Grey, Black or White ABS matte plastic, paintable with dual-layer powder-coated steel with NeverWet™ treated grille
- Dimensions (H x W x D): 11.0" x 13.0" x 13.5" (279 x 330 x 343 mm)
INV#153683
Call
- High-Powered Compression Driver Projects Superior Voice and Tone Signaling
- Includes a 25, 70.7, 100V Transformer with a 45-Ohm Tap
- One-Step Method of Adjusting Bell from Horizontal to Vertical Positioning
- Wide-Angle Sound Dispersion for Maximum Horizontal Pattern Coverage
INV#8997
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection
- Swivel (pan)/tilt wall bracket included
- Built-in 70V/100V transformer, plus 8 ohm direct capability
INV#99773
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#42700
Call
- Compact, two-way, full-range coaxial surface mount loudspeaker
- Infin-A-Ball™ multi-angle wall mounting bracket included
- Modern architectural design
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
INV#103229
Call
- Multi-tap 200W autoformer for 70V and 100V inputs
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#42719
Call
- Two-way full range
- Vented LF enclosure
- 1” voice coil (titanium diaphragm) with Neodymium magnetic structure
- HF section features Coherent Coverage Waveguide™ to minimize interference
- Full bandwidth overload protection for HF and LF
- Three-dimensional ellipse (for compact look)
- Magnetically shielded for video applications
- Comes with Strong Arm Mount (SAM™) and a hex-key
- Suspension insert for SAM™, safety point on rear side
INV#34136
- 8" polypropylene cone woofer
- Large port area for extended low-frequency performance
- Defeatable passive 120 Hz low-pass filter with impedance compensation
- 100 watts continuous power handling, 400 watts peak
- 70/100 V multitap transformer with 8 ohm bypass
- C-ring and tile rails included
- Side cable entry
INV#90671
- 30 watt low-saturation and low-loss 70/100V transformer with 8Ω bypass
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
Complete EASE, CF2, CAD, and BIM information available online
INV#178539
- Multi-tap 200W autoformer for 70V and 100V inputs
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#35666
Call
- Video shielded for use near video monitors
- Extremely smooth frequency response
- Stainless steel grill for harsh environments
- 60 W transformer for 70 V or 100 V lines, with 8 ohms thru
- SonicGuard™ overload protection
- 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter
- Includes InvisiBall® mounting hardware and sealed input panel cover
- Screw-down input terminals
- 100° x 100° high frequency horn
INV#9927
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
- Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options
- Euroblock connectors allows pre-wiring of the system
- Low saturation 70/100V transformer with 8 ohm bypass
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Complete EASE, CAD & BIM information available online
- Can also be used as a Cinema surround loudspeake
INV#153775
- 6” weather treated woofer; 1” silk dome tweeter
- 105° Axisymmetric (conical) coverage
- 80 watt low-saturation and low-loss 70/100V transformer with 8Ω bypass
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
Complete EASE, CF2, CAD, and BIM information available online
INV#165317
- Compact, two-way, full-range coaxial surface mount loudspeaker
- Infin-A-Ball™ multi-angle wall mounting bracket included
- Modern architectural design
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
INV#103226
Call
- 30 watt low-saturation and low-loss 70/100V transformer with 8Ω bypass
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
Complete EASE, CF2, CAD, and BIM information available online
INV#178538
- Low profile Full range 3.5 driver. 40W program
- At 8ohm. 15/7.5/3.8/1.9W 70V taps. Black grill
INV#168568
Call
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
- Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options
- Euroblock connectors allows pre-wiring of the system
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Complete EASE, CAD & BIM information available online
- Can also be used as a Cinema surround loudspeaker
INV#153773
- 1" Ferrofluid Cooled Dome Tweeter & Highly Efficient 4" Polypropylene Woofer
- All 1/4"-20 Hardware Inserts Allow Easy Integration of "Off The Shelf" Security Hardware
- Atlas Sound POLYGUARDT High Frequency Protection Circuit
- Color Matched Heavy-duty Zinc Chromate Plated & Powder Coated "C" Bracket (Included)
- Five-Year Warranty
- OMNIMOUNTT 10 Series Compatible
- Screwdriver Adjustable 16-Watt 70.7V/100V Transformer (may be bypassed for 8-ohm operation)
- TRX WAVEGUIDET- Constant Directivity Style High Frequency Wave Guide System
- Weather-Resistant Construction For Year-round Indoor or Outdoor Use
INV#105702
- Two-way, high-output full range
- Vented LF enclosure
- 1” voice coil (titanium diaphragm) with Neodymium magnetic structure
- HF section features Coherent Coverage Waveguide™ to minimize interference
- Full bandwidth overload protection for HF and LF
- Three-dimensional ellipse (for compact look)
- Magnetically shielded for video applications
- Comes with Strong Arm Mount (SAM™) and a hex-key
- Suspension insert for SAM™, safety point on rear side
INV#34797
- 1" Ferrofluid Cooled Dome Tweeter & Highly Efficient 4" Polypropylene Woofer
- All 1/4"-20 Hardware Inserts Allow Easy Integration of "Off The Shelf" Security Hardware
- Atlas Sound POLYGUARDT High Frequency Protection Circuit
- Color Matched Heavy-duty Zinc Chromate Plated & Powder Coated "C" Bracket (Included)
- Five-Year Warranty
- OMNIMOUNTT 10 Series Compatible
- Screwdriver Adjustable 16-Watt 70.7V/100V Transformer (may be bypassed for 8-ohm operation)
- TRX WAVEGUIDET- Constant Directivity Style High Frequency Wave Guide System
- Weather-Resistant Construction For Year-round Indoor or Outdoor Use
INV#37623
- Compact, two-way, full-range coaxial surface mount loudspeaker
- Infin-A-Ball™ multi-angle wall mounting bracket included
- Modern architectural design
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
INV#103230
Call
- Studio quality transducers for accuracy, and rich bass response: 80 Hz - 20 kHz
- 35 watt power amplifier and high sensitivity drivers produce exceptional output: 111 dB peak SPL
- Balanced XLR, ¼”, and unbalanced RCA inputs allow connection to a range of signal sources
- Stereo headphone jack allows monitoring using headphones
- Ergonomic, side-mounted volume control
- High frequency adjust control - allows the user to contour HF response to application requirements
- Magnetically-shielded transducers for use near CRT monitors and magnetically sensitive equipment
- Internal peak limiter and overload protection circuit - protects the system from damage caused by continuous over-driving
- Wall-mount capable using optional MTC-2P mounting kit
- Included snap-on pedestals optimize listening angle
INV#54401
- 1" FerrofluidT Cooled Dome Tweeter
- All 1/4"-20 Hardware Inserts Allow Easy Integration of "Off The Shelf" Security Hardware
- Atlas Sound TRX WAVEGUIDET- A constant directivity style high frequency wave guide system provides accurate, even high frequency coverage
- Compact, 2-way loudspeaker systems for exceptional performance in music and sound reinforcement systems
- Conforms to 100HR salt spray test per ASTM B117
- Highly efficient 8" HYCONET treated woofer
- OMNIMOUNTT 20 series compatible
- POLYGUARDT` high frequency circuit diverts damaging transient signals to protect the tweeter
- Screwdriver adjustable 60 Watt 70.7V/100V transformer for distributed sound applications with 8Ohm bypass
- Weather-resistant construction for year-round indoor or outdoor use: UV-resistant, talc impregnated, polypropylene, injection molded enclosure, powder coated aluminum grilles and all brass hardware inserts Color matched heavy-duty zinc chromate plated and powder coated "C" Bracket (included)
INV#105700
