Brand:
- FLEXIBLE CONNECTOR MOUNT: PNL-100 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
- DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
- MEDIUM CONNECTOR CAPACITY: One (1) #PNL-106 "CONNECTRIX" Panel will mount up to 6 "CONNECTRIX" Connectors.
- EASY INSTALLATION: Standard "CONNECTRIX" Pocket Panels mount with (4 or 6) self-tapping screws. Each Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.
- DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
- CUSTOM ENGRAVING: Most Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
- CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
INV#38592
- LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#24501
- FLEXIBLE 110VAC MOUNT: FP2E, FP3E, and PE Series Electric Pocket Panels utilize a custom machined mounting panel with cover panels which allow mounting of 1, 2, or 3 gang Edison Duplex outlets.
- DURABLE CONSTRUCTION: ACE Electric Pocket Panels are made from tough 1/16" thick Steel. Stock Electric Pocket Panels are flat, strong, and rigid. ACE Electric Pocket Panels are machine punched and ready for installation.
- PE Panel will mount 1 Edison Duplex Outlet.
- EASY INSTALLATION: Standard Electric Pocket Panels mount with (4 or 6) self-tapping screws. Each Electric Pocket Panel is made to precisely mate within the pocket mounting holes.
- DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
INV#29730
- COVERS AC RACEWAY: DB and DC Cover Plates mount directly on top of the AC isolated raceway to cover and complete the finished look of Super Pockets.
INV#49898
- FLEXIBLE CONNECTOR MOUNT: MP-100 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
- DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
- COMPACT CONNECTOR CAPACITY: One (1) #MP-102 "CONNECTRIX" Panel will mount up to 2 "CONNECTRIX" Connectors.
- EASY INSTALLATION: Standard "CONNECTRIX" Mini Pocket Panels clip into pocket body and mount with 2 self-tapping screws. Each Mini Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.
- DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
- CUSTOM ENGRAVING: Most Mini Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
- CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
INV#98866
- EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#49893
- COMPACT CAPACITY: The Mini Stage Pocket accomodates #MP-100 Series Panels and #MP-200 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #MP-100 Series Panels will mount up to 4 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #MP-200 Series Panels will mount up to 4 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Mini Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.125") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- CABLE WAY SLOTS: Two (2) generous 3/8" x 1-1/4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables.
- EASY INSTALLATION: Easy installation into 2.880" x 5.505" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Mini Stage Pocket Body. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
INV#37041
- 16 patch points to DB25
- Programmable grounds
INV#102700
- Fully balanced, extremely durable 48-Point Patchbay
- Normal, Half-normal and Through Mode operation
- 3-way Front Panel Mode Switches
- 1/4" TRS Connectors
- 19" Rack Mount Chassis
INV#29958
- EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98784
- LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#40709
- EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
- EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#55650
- EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
- EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98848
- FLEXIBLE CONNECTOR MOUNT: PNL-100 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
- DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
- MEDIUM CONNECTOR CAPACITY: One (1) #PNL-106 "CONNECTRIX" Panel will mount up to 6 "CONNECTRIX" Connectors.
- EASY INSTALLATION: Standard "CONNECTRIX" Pocket Panels mount with (4 or 6) self-tapping screws. Each Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.
- DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
- CUSTOM ENGRAVING: Most Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
- CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
INV#117617
- MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#40891
- MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98827
- EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#51277
- Half-normalled or de-normalled
- 48 1/4" points on the front panel
- 48 1/4" points on the rear
- Noise-free
- Reduces wear and tear on studio gear
INV#9449
- 16-Channel remote personal monitor control
- Wizard Set-up and configuration
- Courtesy Lexicon Reverb w/type and wet/dry control
- dbx PeakStop Limiting
- 16 Presets locations
- All inputs and outputs included
- USB - For firmware update
- LCD Screen
- Works on standard BLU link Bus
- Sturdy mic-stand mount built-in
- Works as 48kHz or 96kHz Switchable D/A Conversion
- Up to 60 units can be chained together with no loss of control or fidelity)
INV#123795
- 5 inch deep box with 3/8" gap/slot lid
- Heavy duty 3/16 inch mounting flange and lid
- Standard size electrical conduit knockouts on left and right sides
- The 5" box allows approximately 8 connectors
- Black powdercoated finish
- Custom engraving for insert plates available
INV#86306
- 2RU
- 2X24 1/4" Longframe Solder Bay w/Cable Tray
- Half Normals
INV#59918
- 16 patch points to DB25
- Programmable grounds
INV#94283
- COMPACT CAPACITY: The Mini Stage Pocket accomodates #MP-100 Series Panels and #MP-200 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #MP-100 Series Panels will mount up to 4 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #MP-200 Series Panels will mount up to 4 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Mini Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.125") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- CABLE WAY SLOTS: Two (2) generous 3/8" x 1-1/4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables.
- EASY INSTALLATION: Easy installation into 2.880" x 5.505" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Mini Stage Pocket Body. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
INV#98812
- COMPACT CAPACITY: The Mini Stage Pocket accomodates #MP-100 Series Panels and #MP-200 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #MP-100 Series Panels will mount up to 4 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #MP-200 Series Panels will mount up to 4 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Mini Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.125") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- CABLE WAY SLOTS: Two (2) generous 3/8" x 1-1/4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables.
- EASY INSTALLATION: Easy installation into 2.880" x 5.505" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Mini Stage Pocket Body. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
INV#75465
- FLEXIBLE CONNECTOR MOUNT: MP-100 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
- DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
- COMPACT CONNECTOR CAPACITY: One (1) #MP-102 "CONNECTRIX" Panel will mount up to 2 "CONNECTRIX" Connectors.
- EASY INSTALLATION: Standard "CONNECTRIX" Mini Pocket Panels clip into pocket body and mount with 2 self-tapping screws. Each Mini Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.
- DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
- CUSTOM ENGRAVING: Most Mini Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
- CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
INV#40452
- FLEXIBLE CONNECTOR MOUNT: PNL-140 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
- DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
- LARGE CONNECTOR CAPACITY: One (1) #PNL-1425 "CONNECTRIX" Panel will mount up to 25 "CONNECTRIX" Connectors.
- EASY INSTALLATION: Standard "CONNECTRIX" Pocket Panels mount with (4 or 6) self-tapping screws. Each Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.
DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
CUSTOM ENGRAVING: Most Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. - CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
INV#90881
- EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
- EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98850
- EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
- EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98853
- EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
- EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#38590
- MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98828
- MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98830
- MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#60791
- LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#42805
- LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98838
- EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98787
- EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#58596
- EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
- DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
- SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
- CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
- EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
- DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
- RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
INV#98790
