Brand:
- 500 W x 500 W power module
- Rugged, ABS enclosure delivers light-weight durability
- SOLO™ Rigging System supports deployment without tools or external hardware
- Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
- 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12 and 2 x KLA181
- 90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
- High power, 12” low frequency driver provides extension down to 44Hz without subwoofers
- Extensive DSP further enhances and protects performance
- 1.75” diaphragm compression driver delivers clear and powerful high-frequency reproduction
- powerCON® Input and Thru connections
- Tilt-Direct™ pole mount assists directivity in single-unit applications
INV#90656
- Constant Curvature Array - The waveguide mounts two compression drivers on a continuous arc enabling them to work together acoustically as if they were a single driver.
- Amplitude Shading- Convenient series of switches on each enclosures that controls the output of each high frequency section in the array.
- Suspension and Rigging.
- Dual Angle Pole Socket - JBL's dual angle pole sockets allow great flexibility in aiming the enclosure (not on - WH version)
- Differential Drive® Woofer
INV#42458
- - 1200 watt peak power, bi-amp - 133 dB max SPL -
- 100 x 15 degree line array - 2 x 10" LF - 2"
- Compression Driver - mic/line XLR input, XLR
INV#131711
- Installation-optimized design brings affordable and uncompromised line array performance to a broader range of venues
- Compact and attractive appearance, available in black and white, harmonizes with any installation environment
- Wide 140° horizontal coverage
- Economical and easy-to-install suspension system with ample array adjustability
INV#42366
- Aluminum array frame for KLA Series enclosures;
- Available in black and white.
INV#92840
- Integral rigging hardware for simple connection of VRX915S line-arrays and optional array frame
- 15 inch, 2265G-1 Differential Drive® woofer for extended low-frequency output
- Light and compact for versatility and easy handleability
- 20 mm threaded pole socket for solid, secure satellite speaker mounting
INV#42459
- Aluminum array frame for KLA Series enclosures;
- Available in black and white.
INV#92842
- 1,000 watt power module
- 18" vented subwoofer
- High acoustic output (135 dB SPL peak)
- Frequency range down to 33 Hz (-10 dB)
- Extensive DSP further enhances and protects performance
- powerCON® Input and Thru connections
- Threaded M20 pole-cup receptacle for free-standing applications
- Suspension made possible via M10 fittings or KLA12AF Array Frame
- Integrated threaded pole mount supports up to two KLA12 enclosures
INV#92838
- JBL’s exclusive neodymium magnet Differential Drive® woofer for high-power capacity and light-weight.
- VRX932LA-1 features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
- Constant Curvature waveguide for unprecedented array coherence.
- Integral rigging hardware for simple connection of enclosures and optional array frame. Arrays of up to six enclosures may be flown.
- Array Configuration Selector permits “array shading” in passive mode.
INV#53389
- 1,000 watt power module
- 18" vented subwoofer
- High acoustic output (135 dB SPL peak)
- Frequency range down to 33 Hz (-10 dB)
- Extensive DSP further enhances and protects performance
- powerCON® Input and Thru connections
- Threaded pole-cup receptacle for free-standing applications
- Suspension made possible via M10 fittings or KLA12AF Array Frame
- Integrated threaded pole mount supports up to two KLA12 enclosures
INV#92839
- ENTASYS 200 Column, 2-Way, 12 LF Drivers (Black)
- Frequency shaded LF, two-way column array
- loudspeaker, weather-resistant LF 12 x 80mm long
INV#127350
Call
- JBL’s exclusive neodymium magnet Differential Drive® woofer for high-power capacity and light-weight.
- VRX932LA-1 features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
- Constant Curvature waveguide for unprecedented array coherence.
- Dual angle pole socket for aiming flexibility. One or two speakers may be mounted to a 35 mm pole or tripod stand.
- Integral rigging hardware for simple connection of enclosures and optional array frame. Arrays of up to six enclosures may be flown.
- Array Configuration Selector permits “array shading” in passive mode.
INV#37883
- Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame
- 18 inch, 2268H Differential Drive® woofer for extended low-frequency output
- Large port area for reduced distortion
- 20 mm threaded pole socket for solid, secure satellite speaker mounting
INV#53388
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
- JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
- VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
- Constant Curvature waveguide for unprecedented array coherence.
- Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
- Array Configuration Selector permits "array shading".
INV#50901
- Very high acoustic output capability – 140.5 dB SPL(1m) peak
- Tight musical "punch" combined with low-frequency extension down to 27.4 Hz
- Elegant transport and handling features including an optional transport dolly plus soft cover and four thoughtfully placed handles
- Premium-grade, long-excursion, high-power woofers with 4", fiberglass voice coils, double layer spiders and triple-roll surrounds
- 18 mm Birch ply enclosure with independent, dual chambers and extensive internal bracing for rigidity and solid, accurate reproduction
INV#54450
- ENTASYS 200 Column, 2-Way, 6 LF Drivers (Black)
- Two-way column array loudspeaker,
- weather-resistant LF 6 x 80mm long excursion
INV#127348
Call
- 700 watts RMS, bi-amp 131 dB max SPL 100 x 30
- Slightly tilted pattern control 4 x 6" woofers
- 2.5" voice coil CD on waveguide 65 Hz - 20 KHz
INV#160020
- Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame
- 18 inch, 2268H Differential Drive® woofer for extended low-frequency output
- Large port area for reduced distortion
- 20 mm threaded pole socket for solid, secure satellite speaker mounting
INV#37884
- True line-array performance
- 90° horizontal coverage pattern
- 20° vertical coverage pattern
- 104 dB sensitivity
- Hidden suspension hardware (included) – architecturally pleasing
- Three finishes available – indoor, PI and fiberglass
- EVADA (EVA Design Assistant) software tool
- Single amplifier channel drive configuration for entire array
INV#58140
- 1600 watts, bi-amp 136 dB max SPL 90 x 50 horn
- 15" Neo Woofer, 4" voice coil 2" Titanium dome
- Neo Compression Driver, 4" v.c. RDNet on board
INV#156067
- Single 18" subwoofer in a bass-reflex enclosure
- 850 watt continuous power capacity
- Frequency range down to 29 Hz
- May be suspended at the top, or behind the WL2082-i array
INV#54245
- True line-array performance
- 120° horizontal coverage pattern
- 20° vertical coverage pattern
- 104 dB sensitivity
- Hidden suspension hardware (included) – architecturally pleasing
- Three finishes available – indoor, PI and fiberglass
- EVADA (EVA Design Assistant) software tool
- Single amplifier channel drive configuration for entire array
INV#57137
- True line-array performance
- 90° horizontal coverage pattern
- 6° vertical coverage pattern
- 104 dB sensitivity
- Hidden suspension hardware (included) – architecturally pleasing
- Three finishes available – indoor, PI and fiberglass
- EVADA (EVA Design Assistant) software tool
- Single amplifier channel drive configuration for entire array
INV#57139
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
- 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and light weight.
- Integral rigging hardware for simple connection of enclosures and optional array frame.
- 20 mm threaded pole socket for solid, secure satellite speaker mounting.
- Large port area for reduced distortion.
INV#50902
- 110° x 20° constant curvature line array
- Scalable and arrayable with a multitude of configuration options
- Maximum flown system supports up to 4 x HDA and 2 x HD1801 subwoofers
- Ground stack up to 3 x HDA on HD1801 subwoofer or flybar
- Pole mount up to 2 x HDA on HD1801 subwoofer or tripod using dual angle pole cups
- 200W of ultra-efficient Class-D Fast Recovery™ amplification
- LF 500W RMS / 1000W peak
- HF 100W RMS / 200W peak
- Custom designed transducers by EAW®
- 12” neodymium woofer with 3” voice coil
- Dual Beyma® 1.7" compression drivers with heat-treated titanium diaphragms
- High-definition audio processing
- Revolutionary patented acoustic correction
- Transducer time alignment and phase correction
- Precision 2-way crossover
- Three-position voicing switch for simple array voicing
- Integrated limiting and protection circuitry
- Proven rigging hardware
- Four M10 flypoints
- Integrated flyware allows easy array setup
- Optional Flybar and HD1801 subwoofer flyware kit
- Ultra-compact and lightweight (59 lbs / 26.7 kg)
- Rugged all wood cabinet (15mm birch plywood)
- Supported by EAW Resolution prediction software
INV#161802
- Hybrid® quad 8” (200mm) LF + MF configuration
- LF + MF - 102dB @ 2.83V, 1m (single cabinet)
- Quad 1” (25mm) HF, all horn loaded - 106dB @ 2.83V, 1m
- Max 131dB continuous, 137dB peak output
- Consistent 100° long throw, 120° short throw (-6dB) horizontal mid and HF pattern control
- 30° vertical differential directivity, VDQ
- Passive or bi-amp operation
- Optional yoke/spigot mount adaptor
- Compatible with WMX, WS18X and WS218X sub-woofers
INV#142963
- Ultra-high output, long throw speaker system
- Featuring four One Systems 10-inch high output
- Woofers in a 2x2 array, and two large format
INV#183849
- Two-way Bi-Amp Ribbon Line Source Array SR System
- 12" Neo Black Widow® 4" VC Woofer
- 1,000 watt program, 2000 watt peak power handling
- New Ribbon Driver with Neo magnet, 50% more power handling and 2dB more sensitivity!
- 90 Degrees H by 15 Degrees V coverage pattern (per one cabinet)
- Easy aiming angle adjustment rigging system
- Angle adjustable in 2 1/2 degree increments from 0 to 15 degrees, total angle between adjacent cabinets
- Sound Guard™ tweeter protection
- Inputs are two Neutrik® Speakon® 4-pin jacks in parallel
- 18mm 13-ply Baltic birch enclosure
- Durable HammerHead™ polyurethane finish
INV#58804
- Continuous Directivity constant curve array with eight 2-inch cone drivers disperse sound an amazing 120 degrees horizontally
- 15° vertical directivity can be extended from 30° up to 90° with additional arrayable CDL12Ps
- 12-inch long-throw LF transducer with 2.5-inch voice coil
- Low crossover point minimizes comb filtering and enhances line array intelligibility
- 500 x 500 watts Class D power for high SPLs and lightning-fast transient response
- Locking AC Connector in and out
- Balanced XLR input and output
- Signal, -3 dB, Limiter Protection, and Clip monitoring
- Easy-to-use DSP Controls: Array Mode (1-6 boxes), 90 Hz High Pass Filter, Sub Mode (Off, CDL18s, ULT18, or AIR18s)
- 2-position pole mount for use with up to two CDL12P on a tripod or atop an 18-inch PreSonus subwoofer (Note: a CDL18s must be used for when two CDL12Ps are arrayed)
- Integrated flyware to create an array of up to six CDL12P's
- Easy-to-handle, compact form factor and 63 lb. weight
INV#253486
- Compact and low-profile for minimal obstruction of audience sightlines
- 50° x 90° nominal coverage
- Bi-amplified or full-range passive operation
- Differential Drive® woofer with neodymium magnet for high power capacity and very light weight
- 4" (voice coil) diameter compression driver with neodymium magnet
INV#48856
- Single 18" subwoofer in a bass-reflex enclosure
- 850 watt continuous power capacity
- Frequency range down to 29 Hz
- May be suspended at the top, or behind the WL2082-i array
INV#54246
- Extraordinarily compact (only 20" / 508 mm wide) and lightweight (38 lbs / 17.2 kg)
- High acoustic output (133 dB SPL peak)
- Wide 140° horizontal coverage
- High power, 8" neodymium LF / MF drivers provide low-frequency extension to 62 Hz without subwoofers
- 3" diaphragm compression driver on QSC's patented 140° multiple diffraction aperture waveguide (Patent No. 7,177,437)
- Patented (D576,660) side-mounted vent ports designed for double duty as handles
- Simple, easy-to-use rigging system supports arrays of up to 12 units with 10:1 design factor
- Flexible ground stack capability
- Fully supported in EASE and EASE Focus acoustic software
INV#48235
- Simple, convenient suspension system based on the proven QSC WideLine design. Supports up to 8 WL218-sw subwoofers with 10:1 design factor
- Very high acoustic output capability - 139 dB SPL (1m) peak
- Exceptional "punch" combined with low-frequency extension down to 31 Hz
- Comprehensive transport and handling features including an easy to attach dolly and twelve thoughtfully placed handles
- Premium-grade, long-excursion, high-power woofers with 4", fiberglass voice coils, double layer spiders and triple roll surrounds
- Birch ply enclosure with independent, dual chambers and extensive internal bracing for rigidity and solid, accurate reproduction
INV#42431
- Dual 12" subwoofer in a 4th order bandpass enclosure
- 135 dB SPL peak output capability
- Frequency range to 32 Hz (-10 db down point)
- May be suspended at the top of a WL3082 array or behind the array
- Integral suspension hardware also supports WL3082 in ground stack applications
INV#48239
- Patented multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source
- Exceptionally high output capability in a very compact form factor
- Bi-amp or tri-amp design
- Dual 10" long excursion, high power, low-frequency transducers
- Single 3" diaphragm neodymium compression driver
- WL2102-w Birch ply construction offers reasonable weight (83 lbs, 37.7 kg) at a lower cost
- Fully captive hardware design incorporates all components necessary for box to box rigging
INV#42428
- Installation-optimized design brings affordable and uncompromised line array performance to a broader range of venues
- Compact and attractive appearance, available in black and white, harmonizes with any installation environment
- Wide 140° horizontal coverage
- Economical and easy-to-install suspension system with ample array adjustability
INV#42367
